Type MT32
 Weight
 01. Model number ( on compressor nameplate) MT32JF5MVE
 02. Suction connection 1-1/ 4 " Rotolock
 03. Discharge connection 1 " Rotolock
 04. Suction connection with supplied sleeve 5/ 8 " ODF
 05. Discharge connection with supplied sleeve 1/ 2 " ODF
 06. Oil sight glass Threaded
 07. Oil equalisation connection 3/ 8' ' flare SAE
 08. Oil drain connection None
 09. LP gauge port Schrader
 10. Internal pressure relief valve 30 bar / 8 bar
 11. Cylinders -
 12. Swept volume 53.9 cm3/ rev
 13. Displacement at 50 Hz 9.4 m3/ h
 14. Displacement at 60 Hz -
 15. Nominal speed at 50 Hz 2900 rpm
 16. Nominal speed at 60 Hz -
 17. Nominal voltage at 50 Hz 230V/ 1/ 50Hz
 18. Nominal voltage at 60 Hz -
 19. Voltage range at 50 Hz 207-253 V
 20. Voltage range at 60 Hz -
 21. Winding resistance ( between phases) -
 22. Winding resistance ( between phases 1-2) -
 23. Winding resistance ( between phases 1-3) -
 24. Winding resistance ( between phases 2-3) -
 25. Main winding resistance 0.9 Ohm
 26. Start winding resistance 4.3 Ohm
 27. Maximum Continuous Current ( MCC) 20 A
 28. Maximum Must Trip current ( MMT) -
 29. Locked Rotor Current ( LRA) 70 A
 30. Motor protection Internal overload protector
 31. Net weight 24 kg
 32. Oil charge 1 litre
 33. Oil type Mineral - 160P
 34. Approved refrigerants R22, R417A-160PZ
 35. Refrigerant charge limit 3 kg
 36. Approvals ( CE) CE certified
 37. Approvals ( UL) -
 38. Approvals ( CCC) CCC certified
 39. Maximum system test pressure LP side 25 bar( g)
 40. Maximum system test pressure HP side 30 bar( g)
 41. Maximum differential test pressure 30 bar
 42. Maximum number of starts per hour 12
 43. Packaging Singlepack
 44. Pack quantity 1
 45. Parts shipped with compressor Suction & Discharge solder sleeves, rotolock nuts and gaskets
 46. Parts shipped with compressor Mounting kit with grommets, bolts, nuts, sleeves and washers
 47. Parts shipped with compressor